Free Construction Tool

Brick Calculator – How Many Bricks Do I Need?

Reviewed and updated: August 2026

Calculate the number of bricks, mortar bags, and material cost for any wall or project. Supports standard, modular, queen, and jumbo brick sizes with automatic 10% waste factor.

Enter your wall dimensions, brick size, mortar joint, and price per thousand to get a complete materials estimate. Always order slightly more than calculated: bricks from different lots vary in color.

ft
ft
ft²
$
YOUR RESULTS
Bricks needed
—bricks
Wall area
—ft²
Mortar bags
—bags
Material cost
—

Use this brick calculator to estimate the number of bricks, mortar bags, and material cost for walls, planters, pillars, and other masonry projects. Select your brick size, mortar joint width, and enter wall dimensions to get a complete estimate.

All results include a 10% waste allowance for cuts, breakage, and future repairs. Always purchase all bricks needed from the same production lot: color variation between lots is one of the most common masonry surprises.

How to Calculate Bricks Needed

Brick quantity is based on the face area of the wall and the face area of each brick including mortar joint. The formula is:

Bricks needed = (wall area in sq ft / brick face area in sq ft) x 1.10 (waste factor)

For example, a 20 x 8 foot wall with no openings has 160 square feet of face area. Using standard bricks (3.75 x 2.25 inch face with a 3/8 inch mortar joint), each brick covers approximately 0.1527 square feet (nominal 2.625 x 8.375 inches, including the joint). So: 160 / 0.1527 = 1,048 bricks x 1.10 = 1,153 bricks with waste.

Always subtract door and window openings from the total wall area before calculating: the calculator does this automatically when you enter opening square footage.

Brick Size Reference Guide

Brick dimensions are given as thickness x height x length. The face area used for calculating quantity is height x length including the mortar joint on one edge and one end.

Brick TypeNominal Size (T x H x L)Actual SizeBricks per Sq FtCommon Use
Standard4 x 2.75 x 8.625 in3.75 x 2.25 x 8 in~6.55Residential walls, chimneys, general masonry
Modular4 x 2.75 x 8 in3.625 x 2.25 x 7.625 in~6.86Precise coursing, modern construction
Queen3.125 x 3.375 x 9.625 in3.125 x 2.75 x 9.625 in~4.61Veneer, fewer courses for tall walls
Jumbo4 x 3.375 x 8 in3.625 x 2.75 x 8 in~5.50Faster laying, larger-scale projects
King4 x 3.125 x 10 in3.625 x 2.625 x 9.625 in~4.80Veneer walls, decorative applications
Norman4 x 2.75 x 12 in3.625 x 2.25 x 11.625 in~4.57Horizontal emphasis, fewer vertical joints

Nominal dimensions include the mortar joint on one face and one end. Actual dimensions are the brick itself without mortar. When estimating, always work with nominal dimensions: they account for the mortar joint that is present in every course.

How Much Mortar Do I Need?

Mortar consumption depends on brick size, joint width, and wall thickness. A reliable rule of thumb for single-wythe walls:

For larger projects, buying Portland cement and masonry sand separately and mixing on site is more economical than pre-mixed bags. A standard mortar mix ratio is 1 part Portland cement to 3 parts masonry sand by volume, plus water to workable consistency. Pre-mixed bags are convenient for jobs under 500 bricks.

For a detailed mortar estimate, use our mortar calculator.

Brick Bonds and Patterns

A brick bond is the pattern in which bricks are laid. The bond affects both appearance and structural performance: some bonds are decorative only, while others interlock wythe layers for structural strength.

Bond PatternDescriptionBest ForStructural?
Running bondEach course offset by half a brickMost walls: standard residentialYes
Stack bondAll vertical joints alignedDecorative veneer onlyNo: requires reinforcement
Flemish bondAlternating headers and stretchers each courseDecorative double-wythe wallsYes: ties two wythes
English bondAlternating courses of headers and stretchersStructural double-wythe wallsYes: strongest bond
HerringboneBricks laid at 45-degree anglesPatios, paths, floor applicationsNo
Basket weavePairs of bricks alternating directionDecorative patios and pathsNo

Running bond is the default for most residential masonry work: it is the strongest single-wythe bond and the simplest to lay consistently. Stack bond looks clean and modern but has no structural interlocking between courses: it must be reinforced with horizontal joint reinforcement wire every 1 to 2 courses for structural applications.

Brick Types and Best Uses

Not all bricks are interchangeable. The type of brick affects durability, appearance, and suitability for specific applications.

Estimating for Walls vs. Patios and Paths

Bricks used flat on patios, paths, and floors cover more area per brick than bricks used on edge in a wall. When bricks are laid flat, the coverage depends on the largest face of the brick: not the face that faces outward in a wall.

For a standard brick laid flat on a patio (8 x 3.75 inch face plus joints): each brick covers approximately 0.22 to 0.24 square feet depending on joint spacing. That is roughly 4.2 to 4.5 bricks per square foot for flat-laid applications, considerably fewer than the 6.55 needed for a vertical wall.

Diagonal or herringbone patterns for patios and paths require 10 to 15 percent more material than straight-lay patterns due to angled edge cuts. Always use the higher waste factor for diagonal layouts.

Common Brick Estimating Mistakes

Planning Brick Project Costs

Brick material costs vary widely by type, region, and quantity. Common brick runs $0.50 to $1.00 per brick; face brick runs $0.80 to $2.00 per brick; specialty and handmade bricks can run $3 to $8 per brick. Mortar materials add $0.20 to $0.50 per square foot of wall face. Professional installation adds $15 to $35 per square foot for a single-wythe wall including material and labor.

For detailed mortar quantities, use our mortar calculator. For concrete footings under masonry walls, use our concrete calculator. For total project budgeting, see our project cost estimation guide.

Frequently Asked Questions
How many bricks do I need per square foot? ▾
For a standard brick (3.75 x 2.25 inch face) with a 3/8 inch mortar joint, you need approximately 6.55 bricks per square foot: round up to 7 for ordering. Modular bricks need about 6.86 per square foot. Queen size bricks need about 4.61 per square foot. The calculator uses precise values for each brick size and joint width and adds 10% for waste automatically. For flat patio or path applications, the same brick covers less area: approximately 4.2 to 4.5 bricks per square foot laid flat.
How many bricks do I need for a 10x10 wall? ▾
A 10 x 10 foot wall (100 square feet) using standard bricks at 6.55 bricks per square foot requires 655 bricks before waste. Adding 10% waste brings the order quantity to 721 bricks. You would also need approximately 7 to 8 bags of 60 lb mortar mix for a standard 3/8 inch joint. If the wall has any door or window openings, subtract those square footages first: a standard door opening (3 x 7 feet = 21 sq ft) saves about 138 bricks.
How much does a brick wall cost? ▾
Material costs for a brick wall typically run $3 to $6 per square foot for common face bricks and mortar combined. Professional installation (labor plus materials) runs $15 to $35 per square foot for a single-wythe wall: more for double-wythe structural walls, decorative bonds, or specialty finishes. Brick type has a large effect on cost: common brick is $0.50 to $1.00 per brick while specialty face brick can run $2 to $8 per brick. Always get at least three contractor quotes for any masonry project.
What is the difference between a single and double wythe wall? ▾
A wythe is a single vertical layer of bricks: one brick thick. A single-wythe wall is 3.75 to 4 inches thick (one brick wide) and is used for garden walls, planters, veneer, and non-structural applications. A double-wythe wall is two bricks thick (roughly 8 to 9 inches) with the two layers tied together using header bricks or metal ties. Double-wythe walls are used for structural exterior walls, load-bearing applications, and anywhere greater thickness and strength are needed. The brick count for a double-wythe wall is approximately double a single-wythe wall of the same face dimensions.
Should I use Type S or Type N mortar? ▾
Type S mortar is stronger (minimum 1,800 psi compressive strength) and is recommended for exterior applications, below-grade work, and anywhere the wall will be exposed to moisture, freeze-thaw cycles, or lateral loads: including retaining walls and exterior veneer. Type N mortar is softer (minimum 750 psi) and is used for interior non-load-bearing applications and softer brick types where a rigid mortar could cause brick spalling. When in doubt on an exterior project, use Type S. Never use Type N mortar below grade or in high-moisture applications.